Kabel & Adapter

100m Ring, CAT.5e Installation Cable, Shielded, Total Screen Braiding, 8-Wire, Rigid Inner Conductor, Halogenfree Jacket, AWG 24, 8x0.52mm CCA, Outer Diameter 5.8mm, Gray

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 50m.

The 100m spool of CAT.6 Installation Cable/Structured Cable provides a reliable and high-performance solution for your network installations. With its length of 100 meters, you have ample cable to connect your networks. The CAT6 cable is suitable for use with network outlets, patch panels or similar - The wires are suitable for application with LSA tool. The halogen-free jacket of the cable not only provides reliable protection but also contributes to environmental friendliness and adds an extra layer of safety to your network area.

The antenna cable of the type CNT400 is an extremely low attenuation and high quality coaxial antenna cable. It is supplied with the connector combination N male connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz.

The antenna cable of the type CNT400 is an extremely low attenuation and high quality coaxial antenna cable. It is supplied with the connector combination N female connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz.

Coaxial pigtail with connector FME male to CRC-9 male. The cable used is an RG-178 cable with a length of 25cm. Further information about CRC-9 connector can be found below in the description.

Coaxial pigtail with connector combination FME male to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm. Further information about MC-CARD connector can be found below in the description.

Coaxial pigtail with connector combination FME male to SSMB male. The cable used is an RG-178 cable with a length of 25cm. Further information about SSMB connector can be found below in the description.

10pcs Ubiquiti TC-CON RJ45 connectors: The plugs fit perfectly with the Ubiquiti Ethernet cable TOUGHCable PRO and CARRIER and can be put on with a regular crimping tool.

This N bulkhead jack with a four-hole flange is known for its long lifespan and low attenuation.

This N bulkhead jack features center mounting and is known for its long lifespan and low attenuation