The JARFT J4GMB-14-DOMPA multiband 4G directional antenna provides a gain of up to 14dBi and supports all 4G frequency bands (800 MHz, 1800 MHz, 2600 MHz). Therefore, the antenna can be used universally for all 4G providers and significantly enhances your 4G connection.

Due to its weatherproof design, the antenna can be easily used outdoors as an 4G outdoor antenna. Once properly aligned and mounted, this 4G directional antenna delivers consistent results and ensures a stable 4G data connection.

The 4G antenna is available either without an antenna cable or with a 2.5m / 5m / 10m twin antenna cable (N connector suitable for the antenna, SMA connector suitable for all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9. You can, of course, find this in our assortment.

The JARFT J4GMB-12-OMOA multiband 2x2 MIMO 4G omnidirectional antenna provides a gain of up to 12dBi and covers all 4G frequency bands used in Germany and Europe (800, 1800, 2600 MHz). Therefore, the 4G antenna is universally suitable for all providers and 4G networks and does not require separate alignment due to its omnidirectional characteristic. By using this 4G multiband antenna, you can enhance your 4G connection.

The design of the 4G antenna is compact, making it discreet and suitable for installation even in limited space. The corresponding mounting accessories for mast installation are included.

The 4G omnidirectional antenna is available either without antenna cables or with a 2.5m / 5m / 10m twin antenna cable (N connector compatible with the antenna, SMA connector compatible with all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9, which you can find in our product range.

he RF-240 antenna cable is a very low-loss, high-quality, and cost-effective coaxial antenna cable. Due to its low attenuation (double shielding), the cable is very well-suited for WLAN, LoRa, GSM, UMTS, LTE, or even 5G frequency bands and applications up to 6GHz. In comparison to the H-155 cable, which is also available with us, the RF-240 cable has a rigid inner conductor. Therefore, RF-240 is not as flexible as H-155, but it has better attenuation values and is suitable for applications up to 6GHz without any issues. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.

Weatherproof, robust, and compact multiband 5G / 4G antenna. This directional antenna offers a solid gain of up to 8dBi, is extremely broadband, covers all 5G and 4G frequency bands, and can therefore be used universally for all 5G or 4G data connections. Using this antenna can significantly enhance your LTE or 5G data connection.

The design of the antenna is compact. The directional characteristics and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aligned with the nearest mast of your 4G or 5G provider. Due to its weatherproof housing, this model can be easily used as an outdoor LTE or 5G antenna.

Solid mounting accessories for mast installation are included. A suitable antenna cable is optionally available in 2.5m, 5m, or 10m lengths. Using this antenna can significantly enhance your 4G or 5G data connection.

Our weatherproof and robust 2x2 MIMO Multiband 5G / 4G (LTE) Antenna offers outstanding performance. With a gain of up to 14dBi and tremendous broadband capability, it covers all 5G / 4G frequency bands, making it a universal solution for all 5G or 4G data connections. The directional characteristics and strong signal focusing ensure stable 4G or 5G connections even over long distances, requiring alignment with the nearest transmitter mast from your provider. Thanks to its weatherproof housing, it is ideal for outdoor use as an 4G and 5G outdoor antenna. Solid mounting accessories for mast installation are included in the package. Optionally, a suitable TWIN antenna cable in 2.5, 5m or 10m can be ordered.

The antenna cable in twin/dual configuration is equipped with the connector combination of N male (suitable for most LTE (4G) or 5G antennas) to SMA male (suitable for most 4G and 5G router models). The 4G / 5G antenna cable is flexible, high-quality, and well-balanced regarding signal loss and flexibility.

This cable is specifically designed for use with an 4G or 5G antenna and a corresponding router. An example view of an SMA connection to a router can be found in the product images. The antenna cable can be used for 2x2 MIMO operation, and of course, for 4x4 MIMO operation as well. For 4x4 MIMO operation, two of these antenna cables are required.

This 4G / 5G antenna cable is available in lengths of 2.5m, 5m, and 10m.

Weatherproof and robust 2x2 MIMO multiband 5G / 4G panel antenna from PROSCAN. The directional antenna offers a substantial gain of up to 9.5dBi, is extremely broadband (600 - 6000 MHz), covers all 5G and 4G frequency bands, and can therefore be universally used for all 5G or 4G data connections. By using this antenna, you can significantly enhance your 4G or 5G data connection.

The design of the antenna is compact. The directional characteristic and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aimed at the nearest transmitter mast of your 4G or 5G provider. With its weatherproof housing according to IP65, this model can easily be used as an 4G or 5G outdoor antenna.

Solid mounting accessories with 2D regulation for mast and wall mounting are included in the package. The antenna comes with two 5m long antenna cables with SMA connectors. This way, the antenna can be directly connected to your 4G or 5G router. By using this antenna, you can significantly enhance your LTE or 5G data connection.

The BATLINK MAO5GV2-4 is a multiband 4x4 MIMO 4G / 5G antenna with omnidirectional characteristics, a white casing, and a performance gain of up to 9dBi. The antenna covers the frequency range from 698 MHz to 3700 MHz and is therefore fully compatible with common 4G and 5G frequencies. Due to the high-quality materials used (V4A and ABS plastic), the BATLINK MAO5GV1 antenna is also suitable for maritime use (marine grade) as well as for use as an outdoor 4G / 5G antenna and withstands even extreme weather conditions (IP66) and aggressive seawater.

With a performance gain of up to 9dBi, the 4x4 MIMO 4G / 5G antenna reliably increases the range, signal strength, and data transmission rate of your connection. The omnidirectional antenna is compact and has a shock-resistant casing. The BATLINK MAO5GV2-4 consists of four individual antennas mounted on the included 4x4 MIMO V4A stainless steel mast mount. The delivery also includes robust V4A pipe clamps, so the antennas can be mounted individually if needed.

Optionally, you can order a matching antenna cable (N-plug to SMA plug). This is compatible with almost all 4G and 5G routers. Suitable adapters, window feed-throughs, and antenna mounts can be found under accessories.

The QuSector 9HV-65-2 (S9HV.65.2RS) from QuWireless is a dual-band 2x2 MIMO WiFi directional antenna. The antenna operates in both the 2.4 GHz band with 8dBi gain and in the frequency range from 5 to 7 GHz with 9dBi gain. Due to its wide frequency coverage, the antenna can be used for the following WiFi standards: 802.11 a / b / g / n / ac / ax, WiFi 6E, WiFi 7.

Due to its moderate gain, the 2x2 MIMO directional antenna can be used for short or medium distances. This model is a future-proof solution with support for WiFi 6E and even WiFi 7.

The high-quality injection-molded enclosure with IP67 rating allows implementation both indoors and outdoors. The wide frequency range (2.4-2.5 GHz and 5-7 GHz) allows you to select the appropriate frequency for the most effective operation.

This version of the QuSector 9HV-65-2 has two 70cm long antenna cables of type LMR195 with RP-SMA connectors. This means you can connect this antenna directly to your WiFi router or access point and put it into operation.

The antenna is designed for mast or wall mounting. The appropriate mounting accessories are included in the delivery.

The QuSector 9HV-65-4 (S9HV.65.4RS) from QuWireless is a dual-band 4x4 MIMO WiFi directional antenna. The antenna operates in both the 2.4 GHz band with 8dBi gain and in the frequency range from 5 to 7 GHz with 9dBi gain. Due to its wide frequency coverage, the antenna can be used for the following WiFi standards: 802.11 a / b / g / n / ac / ax, WiFi 6E, WiFi 7.

Due to its moderate gain, the 4x4 MIMO directional antenna can be used for short or medium distances. This model is a future-proof solution with support for WiFi 6E and even WiFi 7.

The high-quality injection-molded enclosure with IP67 rating allows implementation both indoors and outdoors. The wide frequency range (2.4-2.5 GHz and 5-7 GHz) allows you to select the appropriate frequency for the most effective operation.

This version of the QuSector 9HV-65-4 has four 70cm long antenna cables of type LMR195 with RP-SMA connectors. This means you can connect this antenna directly to your WiFi router or access point and put it into operation.

The antenna is designed for mast or wall mounting. The appropriate mounting accessories are included in the delivery.

The Teltonika RUTX50 is a future-proof 5G router that offers a communication solution for fast and data-intensive applications. The RUTX50 can be easily used in both industrial and private environments, impressing with its outstanding hardware and software design, flexible power supply (9 - 50V), and extensive range of features such as GPS, OpenVPN client/server scenarios, DDNS with more than 25 predefined providers, load balancing, dual-SIM with auto-failover, backup WAN, and other switching scenarios. A notable feature is the extremely robust housing of the RUTX50.

The RUTX50 supports 5G speeds of up to 3.3 Gbps and is, of course, backward compatible with LTE/4G (CAT20) and 3G network technologies. Five Gigabit Ethernet ports and dual-band 802.11ac WiFi enable reliable data transmission with extremely low latency. The RUTX50 can be used in many scenarios, such as private households, offices, large enterprises, industrial plants, machinery, and vending machines, as well as in vehicles, RVs, or campers. Like all Teltonika routers, the RUTX50 can also be remotely managed via the TELTONIKA RMS system.

We also offer suitable 5G antennas for the Teltonika RUTX50 router.

The Teltonika RUTC50 is a highly performant 5G router that offers a communication solution for fast and data-intensive applications. The RUTC50 can be easily used in both industrial and private environments and impresses with its outstanding hardware and software design, flexible power supply (9-50V), and extensive range of features such as GPS, OpenVPN client/server scenarios, DDNS with more than 25 predefined providers, load balancing, dual SIM with auto-failover, backup WAN, and other switching scenarios. A special feature is the extremely robust housing of the RUTC50.

The RUTC50 allows 5G speeds of up to 3.3 Gbps and is, of course, backward compatible with LTE / 4G (CAT20) and 3G network technologies. Five gigabit Ethernet ports and WiFi 6 enable reliable and fast data transmission with extremely low latency. The RUTC50 can be used in many scenarios, such as private households, offices, large enterprises, industrial facilities, machines and vending machines, as well as in vehicles, RVs, or campers. Like all Teltonika routers, the RUTC50 can also be remotely managed via the TELTONIKA RMS system.

In direct comparison to the Teltonika RUTX50 5G router, the RUTC50 router is equipped with a WiFi 6 module, allowing wireless transmission rates of up to 2400 Mbps. The RUTC50 also has a faster processor and more RAM.