Antenna Cable WiFi

The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination N male plug to RP-SMA male plug in the desired length, making it ideal for connecting a WiFi antenna to a WiFi router. Typically, WiFi outdoor antennas have an N female socket, while WiFi routers have an RP-SMA female socket. This cable fits perfect to this situation.

The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.

This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.

The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination RP-SMA male to RP-SMA female in the desired length, making it ideal for extending an existing cable connection between a WiFi antenna and a WiFi router.

The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.

This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.

The antenna cable type H-155 is a low-loss and quite flexible coaxial antenna cable. Due to its low attenuation (double shielding), the cable is well-suited for applications up to 3GHz (WLAN, LoRa, GSM, UMTS, or LTE). In direct comparison to the RF240 coaxial cable (also available with us), the H155 cable is not equipped with a rigid inner conductor but with a composite of copper strands. This provides higher flexibility but also slightly weaker attenuation values. The H-155 cable is designed for use up to 3GHz, while the RF-240 cable is designed for use up to 6GHz. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.

he RF-240 antenna cable is a very low-loss, high-quality, and cost-effective coaxial antenna cable. Due to its low attenuation (double shielding), the cable is very well-suited for WLAN, LoRa, GSM, UMTS, LTE, or even 5G frequency bands and applications up to 6GHz. In comparison to the H-155 cable, which is also available with us, the RF-240 cable has a rigid inner conductor. Therefore, RF-240 is not as flexible as H-155, but it has better attenuation values and is suitable for applications up to 6GHz without any issues. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.

Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ensures a secure and low-loss connection between the antenna cable of your 2x2 MIMO WLAN antenna and the antenna cable or even the antenna ports of your WLAN router or access point.

You can also find this RP-SMA WLAN window feed-through in a single version as well as a 4x4 MIMO variant in our range. This window feed-through is also available in our shop for use with an LTE/5G antenna and corresponding routers.

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.

Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a stable and low-loss connection between your 4x4 MIMO WLAN antenna's cable and the antenna cable, or even directly to the antenna ports of your WLAN router or access point.

This RP-SMA WLAN window feed-through is also available in a single and 2x2 MIMO version in our range. Additionally, it is compatible for use with LTE/5G antennas and corresponding routers, also available in our shop.

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the cable ideal for routing the antenna cable of a WiFi antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

The antenna cable of the type CNT400 is an extremely low attenuation and high quality coaxial antenna cable. It is supplied with the connector combination N female connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz.

High-quality crafted coaxial pigtail with the connector combination of N female (bulkhead socket) to RP-SMA female plug with a 90° angle. The pigtail has a length of 30cm and is manufactured on an RG405 cable. The cable is extremely flexible while maintaining its shape stability due to the jacket

High-quality coaxial pigtail with the connector combination U.FL plug to RP-SMA socket. The pigtail is made on RG-178 cable and has a length of 25cm. The RP-SMA socket is supplied including a lock nut and washer. So it can be used as an RP-SMA bulkhead socket.

High-quality assembled coaxial pigtail with the connector combination U.FL plug to N male plug. The low loss pigtail has a length of 25cm and is made on RG-178 cable.

High quality coaxial pigtail with the connector combination U.FL plug to N female socket. The pigtail has a length of 25cm and is made with RG-178 cable. The socket is supplied with a lock nut and washer and can therefore be used as a bulkhead socket.

Coaxial pigtail with RP-SMA plug (angled) to RP-SMA socket. 20cm, RG-316 cable.

The compact magnetic base with high holding force and RP-SMA connector/socket is designed for use with a WiFi antenna. On the magnetic base, there is an RP-SMA socket onto which a WiFi antenna can be easily screwed. The 1.5-meter long antenna cable is equipped with an RP-SMA connector.

Even small objects can significantly interfere with your WiFi signal. Use this magnetic base for optimal positioning of your WiFi antenna, to get a better WiFi signal and to avoid interference factors. By using the magnetic base to position the WiFi antenna, you can better place your WiFi antenna and thus ensure a more stable WiFi connection.

The compact 2x2 MIMO magnetic base with high holding force and RP-SMA connector/jack is designed for use with two WiFi antennas. On the magnetic base, there are two RP-SMA jacks to which two WiFi antennas can be easily screwed on. The two 1.5-meter long antenna cables are each equipped with an RP-SMA connector.

Even small objects can significantly interfere with your WiFi signal. Use this magnetic base for optimal positioning of your WiFi antenna, to get a better WiFi signal and to avoid interference factors. By using the magnetic base to position the WiFi antenna, you can better place your WiFi antenna and thus ensure a more stable WiFi connection.

The compact 3x3 MIMO magnetic base with high holding force and RP-SMA connector/jack is designed for use with two WiFi antennas. On the magnetic base, there are two RP-SMA jacks to which two WiFi antennas can be easily screwed on. The two 1.5-meter long antenna cables are each equipped with an RP-SMA connector.

Even small objects can significantly interfere with your WiFi signal. Use this magnetic base for optimal positioning of your WiFi antenna, to get a better WiFi signal and to avoid interference factors. By using the magnetic base to position the WiFi antenna, you can better place your WiFi antenna and thus ensure a more stable WiFi connection.

The compact 4x4 MIMO magnetic base with high holding force and RP-SMA connector/jack is designed for use with two WiFi antennas. On the magnetic base, there are four RP-SMA jacks to which two WiFi antennas can be easily screwed on. The four 1.5-meter long antenna cables are each equipped with an RP-SMA connector.

Even small objects can significantly interfere with your WiFi signal. Use this magnetic base for optimal positioning of your WiFi antenna, to get a better WiFi signal and to avoid interference factors. By using the magnetic base to position the WiFi antenna, you can better place your WiFi antenna and thus ensure a more stable WiFi connection.