JARFT

Our weatherproof and robust 2x2 MIMO Multiband 5G / 4G (LTE) Antenna offers outstanding performance. With a gain of up to 14dBi and tremendous broadband capability, it covers all 5G / 4G frequency bands, making it a universal solution for all 5G or 4G data connections. The directional characteristics and strong signal focusing ensure stable 4G or 5G connections even over long distances, requiring alignment with the nearest transmitter mast from your provider. Thanks to its weatherproof housing, it is ideal for outdoor use as an 4G and 5G outdoor antenna. Solid mounting accessories for mast installation are included in the package.

This item is a B-grade item:
The item may show signs of use
The product images show new goods, not the B-grade item
Special warranty of 12 months
Original packaging may be damaged or missing

Compact WiFi omnidirectional / rod antenna with 2 dBi gain, suitable for short distances, supporting all common WiFi standards in the 2.4 GHz frequency band (IEEE 802.11b/g/n).

The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas that span multiple floors, for example.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a hinge, and can be directly screwed onto a router or access point. The antenna's casing is made of black plastic.

2.4GHz WiFi omnidirectional antenna for use in IoT, M2M or automotive scenarios. The WiFi antenna is specially designed for installation on ceilings, equipment cabinets, work tables, vending machines, machines or vehicles. The compact omnidirectional antenna has a power gain of 5dBi in the 2.4GHz frequency band and a compact, robust plastic housing (available in white or black) which meets the IP65 standard. This means that the antenna can also be used as outdoor antenna without any problems. On the underside of the antenna is a 2.5cm long plastic thread with a lock nut. A rubber lip on the edge of the housing provides additional protection against moisture penetration. The antenna cable (available in 30cm or 150cm length) of type CLF100 is equipped with an RP-SMA connector.

The JARFT J4GMB-14-DOMPA multiband 4G directional antenna provides a gain of up to 14dBi and supports all 4G frequency bands (800 MHz, 1800 MHz, 2600 MHz). Therefore, the antenna can be used universally for all 4G providers and significantly enhances your 4G connection.

Due to its weatherproof design, the antenna can be easily used outdoors as an 4G outdoor antenna. Once properly aligned and mounted, this 4G directional antenna delivers consistent results and ensures a stable 4G data connection.

The 4G antenna is available either without an antenna cable or with a 2.5m / 5m / 10m twin antenna cable (N connector suitable for the antenna, SMA connector suitable for all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9. You can, of course, find this in our assortment.

Flat 2.4GHz WiFi omnidirectional antenna with 4dBi gain, articulated joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).

The 4dBi gain of this WiFi omnidirectional antenna results in a slight concentration of the signal within the vertical radiation pattern. Therefore, the antenna is well-suited for larger, even taller spaces, though it may not be ideal for WiFi coverage across multiple floors.

Designed for indoor use, the WiFi omnidirectional antenna features an RP-SMA connector with an articulated joint and can be directly attached to a router or access point. The housing of the WiFi antenna is made of white plastic.

Dual-band 2.4 / 5GHz WiFi omnidirectional antenna designed for IoT, M2M, or automotive applications. This WiFiantenna is specifically designed for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in 2.4 GHz and 5dBi in 5 GHz WiFi frequency band. It features a compact, robust plastic housing (available in white or black) that complies with IP65 standards, allowing the antenna to be used outdoors without issues. The underside of the antenna has a 2.5cm plastic thread with a lock nut. A rubber lip on the edge of the housing provides additional protection against moisture. The antenna cable (available in 30cm or 150cm length) of type CLF100 comes with an RP-SMA connector.

The JARFT J4GMB-12-OMOA multiband 2x2 MIMO 4G omnidirectional antenna provides a gain of up to 12dBi and covers all 4G frequency bands used in Germany and Europe (800, 1800, 2600 MHz). Therefore, the 4G antenna is universally suitable for all providers and 4G networks and does not require separate alignment due to its omnidirectional characteristic. By using this 4G multiband antenna, you can enhance your 4G connection.

The design of the 4G antenna is compact, making it discreet and suitable for installation even in limited space. The corresponding mounting accessories for mast installation are included.

The 4G omnidirectional antenna is available either without antenna cables or with a 2.5m / 5m / 10m twin antenna cable (N connector compatible with the antenna, SMA connector compatible with all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9, which you can find in our product range.

Multiband LTE omnidirectional antenna with up to 5dBi performance gain, SMA connector and articulated joint. With this 4G antenna you easily strengthen the connection of your 4G router. The compact rod antenna is screwed directly onto your 4G router. External 4G antenna connectors in SMA format are required for this. The 4G omnidirectional antenna is suitable for all 3G and 4G frequency bands used in Europe. As a rule, you need two of these antennas for an router.

2.4GHz WiFi omnidirectional antenna with 7 dBi gain, swivel joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).

The 7 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 17°, focusing the signal. Therefore, the antenna is very suitable for larger rooms but not necessarily ideal for WiFi coverage over multiple floors.

The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.

This compact 2x2 MIMO dual band 2.4 / 5 GHz WiFi omni-directional antenna is designed for installation on ceilings, equipment cabinets, work desks, vending machines, machinery, or vehicles. It features a compact design with a 3dBi @ 2.4GHz and 5dBi @ 5GHz frequency band. The antenna is housed in a sturdy, white plastic casing (also available in black) that meets the IP65 standard, making it suitable for outdoor use. The bottom of the WiFi antenna is equipped with a 2.5cm plastic thread and a locking nut for easy installation. A rubber lip on the edge of the housing provides additional protection against moisture infiltration. The two 150cm long antenna cables, type CLF100, are fitted with an RP-SMA connector each.

2.4GHz WiFi omnidirectional antenna with 9dBi gain, swivel joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).

The 9dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 12°, focusing the signal. Therefore, the antenna is very suitable for large rooms but not necessarily ideal for WiFi coverage over multiple floors.

The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.

2x2 MIMO dual-band 2.4 / 5 - 7:1 GHz WiFi omnidirectional antenna for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in the 2.4 GHz as well as the 5 GHz and the new 6 GHz frequency bands, and a compact, robust plastic housing (available in black or white) that complies with the IP65 standard. Thus, the antenna can also be easily used as an outdoor antenna. On the underside of the WiFi antenna, there is a 2.5cm long plastic thread with a lock nut. A rubber lip on the housing edge provides additional protection against the penetration of moisture into the object on which the antenna is mounted. The two 150cm long CLF100 type antenna cables each have an RP-SMA connector. This antenna covers not only the classic frequency bands of 2.4 GHz and 5 GHz but also the extended 6 GHz band. Therefore, this antenna is capable of being used in WiFi 6E scenarios.

Weatherproof 2.4GHz WiFi omnidirectional antenna / rod antenna with 5 dBi gain and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n). The RP-SMA antenna connection is sealed with a rubber O-ring. The antenna housing material is UV-resistant.

The 5 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 40°, focusing the signal. Therefore, the antenna is well-suited for illuminating small outdoor areas.

The WiFi omnidirectional antenna is explicitly designed for outdoor use and can be directly attached to a router or access point. The casing of the WiFi antenna is made of gray plastic.

Multiband 2x2 MIMO 4G Omni-directional Antenna for installation on ceilings, equipment cabinets, work tables, vending machines, machinery, or vehicles. The compact omni-directional antenna provides a gain of 1-4dBi and features a compact, sturdy, plastic housing (available in black and white) that complies with the IP65 standard. Therefore, the antenna can be easily used outdoors. On the underside of the 4G antenna, there is a 2.5cm long plastic thread with a lock nut. A rubber lip on the housing edge provides additional protection against the penetration of moisture into the object on which the antenna is mounted. The two antenna cables (available in 30cm and 150cm) of the RG174 type are each equipped with an SMA connector and can thus be connected to all common 4G routers or gateways.

The powerful 5-in-1 multiband 4G / WiFi / GPS antenna can be used, for example, as a vehicle antenna, installed on vending machines or equipment cabinets, or even for ceiling installations. The antenna housing is made of robust, weatherproof, and durable plastic. The multiband antenna can be used in temperatures ranging from -30°C to +85°C. The all-around antenna supports all 4G frequencies used in Europe, as well as GPS/GLONASS and the 2.4/5 GHz WiFi frequency bands. The antenna provides a gain of up to 4dBi.

The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination N male plug to RP-SMA male plug in the desired length, making it ideal for connecting a WiFi antenna to a WiFi router. Typically, WiFi outdoor antennas have an N female socket, while WiFi routers have an RP-SMA female socket. This cable fits perfect to this situation.

The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.

This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.

The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination RP-SMA male to RP-SMA female in the desired length, making it ideal for extending an existing cable connection between a WiFi antenna and a WiFi router.

The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.

This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.

This coaxial adapter / T-piece adapter features an RP-SMA male to 2 x RP-SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.

The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.

Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).

The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.

This coaxial adapter / T-piece adapter features an RP-SMA female to 2 x RP-SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.

The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.

The antenna cable type H-155 is a low-loss and quite flexible coaxial antenna cable. Due to its low attenuation (double shielding), the cable is well-suited for applications up to 3GHz (WLAN, LoRa, GSM, UMTS, or LTE). In direct comparison to the RF240 coaxial cable (also available with us), the H155 cable is not equipped with a rigid inner conductor but with a composite of copper strands. This provides higher flexibility but also slightly weaker attenuation values. The H-155 cable is designed for use up to 3GHz, while the RF-240 cable is designed for use up to 6GHz. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.

This cavity bandpass filter is specially designed for the LoRa / Helium frequency band and impresses with its very good technical parameters. By using this filter, interfering signals from other frequency bands, such as the 4G 800MHz frequency band, are filtered out and attenuated very efficiently. In this way, signals from much greater distances can be received and processed with little interference. Especially the good signal suppression and the low insertion loss of less then 1dB perform extremely well with this model. Compared to a SAW filter, this cavity filter has significantly better performance and delivers a much better result.

Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).

The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of white plastic.

This coaxial adapter / T-piece adapter features an SMA male to 2 x SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.

The following always applies at our webshop: If you are unsure which coax adapter you need, please feel free to contact us.

he RF-240 antenna cable is a very low-loss, high-quality, and cost-effective coaxial antenna cable. Due to its low attenuation (double shielding), the cable is very well-suited for WLAN, LoRa, GSM, UMTS, LTE, or even 5G frequency bands and applications up to 6GHz. In comparison to the H-155 cable, which is also available with us, the RF-240 cable has a rigid inner conductor. Therefore, RF-240 is not as flexible as H-155, but it has better attenuation values and is suitable for applications up to 6GHz without any issues. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.

Compact WiFi omnidirectional antenna / rod antenna with flat design a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax). The signal is radiated with a 360° horizontal and 50° vertical spread.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.

This coaxial adapter has the connector combination of RP-SMA male to SMA male and is angled (90°). The adapter stands out for its solid quality, long lifespan, and low attenuation value.

Such a coaxial adapter can be used to switch from one coaxial connector format to another. In this case, it is an angled coaxial adapter.

As always with us, the following applies: If you are unsure about which coaxial adapter you need, please feel free to contact us.

Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).

Omnidirectional WiFi Antennas in general are charcteristically constructed to cover large areas and to provide the WiFi Signal all-over into all directions. This WiFi Antenna has a horizontal beamwidth of 360° and a vertical beamwidth of 12° which allows to use this WiFi Omni Antenna in single-storey buildings.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.

This 50 ohm coaxial adapter has the connector combination of RP-TNC male to RP-SMA female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-TNC male to RP-SMA female connectors.

As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

Compact WiFi omnidirectional antenna / rod antenna with a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5-7.1 GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands as well as the new extended WiFi 6E standard with a frequency range up to 7100 MHz (IEEE 802.11b/g/n/ac/ax). The signal is radiated with 360° horizontal and 50° vertical coverage.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The flat casing of the WiFi antenna is made of black plastic.

This 50 ohm coaxial adapter has the connector combination of RP-SMA male to N female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA male to N female connectors.

As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

Compact WiFi omnidirectional antenna / rod antenna with a 3dBi gain in the 2.4GHz frequency band and 5dBi in the 5-7.1 GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands as well as the new extended WiFi 6E standard with a frequency range up to 7100 MHz (IEEE 802.11b/g/n/ac/ax). The signal is radiated with 360° horizontal and 50° vertical coverage.

The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The flat casing of the WiFi antenna is made of black plastic.

This 50 ohm coaxial adapter has the connector combination of RP-SMA female to N female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA female to N female connectors.

As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.

Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ensures a secure and low-loss connection between the antenna cable of your 2x2 MIMO WLAN antenna and the antenna cable or even the antenna ports of your WLAN router or access point.

You can also find this RP-SMA WLAN window feed-through in a single version as well as a 4x4 MIMO variant in our range. This window feed-through is also available in our shop for use with an LTE/5G antenna and corresponding routers.

This 50-ohm coaxial adapter has the connector combination of RP-SMA male to RP-TNC female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.

Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA male to RP-TNC female connectors.

As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

The antenna cable in twin/dual configuration is equipped with the connector combination of N male (suitable for most LTE (4G) or 5G antennas) to SMA male (suitable for most 4G and 5G router models). The 4G / 5G antenna cable is flexible, high-quality, and well-balanced regarding signal loss and flexibility.

This cable is specifically designed for use with an 4G or 5G antenna and a corresponding router. An example view of an SMA connection to a router can be found in the product images. The antenna cable can be used for 2x2 MIMO operation, and of course, for 4x4 MIMO operation as well. For 4x4 MIMO operation, two of these antenna cables are required.

This 4G / 5G antenna cable is available in lengths of 2.5m, 5m, and 10m.

This WiFi omnidirectional antenna has a performance gain of 5dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The dipole antenna is black, is suitable for indoor use and has an RP-SMA connector with an articulated joint.

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.

Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a stable and low-loss connection between your 4x4 MIMO WLAN antenna's cable and the antenna cable, or even directly to the antenna ports of your WLAN router or access point.

This RP-SMA WLAN window feed-through is also available in a single and 2x2 MIMO version in our range. Additionally, it is compatible for use with LTE/5G antennas and corresponding routers, also available in our shop.

This 50-ohm coaxial adapter features the connector combination of RP-SMA male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with RP-SMA male to N male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

The twin/dual antenna cable (two cables in one strand) is equipped with an SMA male to SMA female connector combination. The 4G / 5G antenna cable is flexible, well-crafted, and well-balanced in terms of signal loss and flexibility. This cable is specifically designed for extending an existing antenna cable between an 4G or 5G antenna and an 4G or 5G router. The cable is available in lengths of 5m and 10m. If you need a custom length, you can easily use our cable configurator.

This WiFi omnidirectional antenna has a performance gain of 7dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The rod antenna is black, suitable for indoor use and has an RP-SMA connector with an articulated joint and is simply screwed onto your WiFi device.

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 2x2 MIMO 5G or LTE outdoor antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.

Equipped with two SMA plugs and two SMA sockets, the feed-through ensures a secure and low-loss connection between the antenna cable of your 2x2 MIMO 5G/LTE antenna and the antenna cable or directly to the antenna ports of the router or access point.

This SMA window feed-through is also available in a simpler version as well as for 4x4 MIMO in our range. Additionally, we offer this feed-through for use with WiFi antennas.

This 50-ohm coaxial adapter has the connector combination of RP-SMA female to N male. The adapter is characterized by its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this case, it is an adapter with RP-SMA female to N male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

Antenna cable of type H155 in Twin/Dual configuration (two cables in one strand). The antenna cable is quite flexible and cost-effective. This coaxial cable is specifically designed for use as an extension or connection cable between an LTE or 5G antenna and a corresponding LTE/5G router. Simply choose the connectors and desired length. The cable is hand-assembled by us, allowing us to accommodate individual preferences and consistently ensure high quality. If you require a specific cable length not listed, feel free to contact us.

This WiFi omni antenna has a performance gain of 9dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The rod antenna is black, is suitable for indoor use and has an RP-SMA connector with an articulated joint and is simply screwed onto the WiFI device. The antenna has a signal opening angle of 360 ° horizontal and 12 ° vertical.

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 4x4 MIMO 5G or LTE outdoor antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.

Equipped with four SMA plugs and four SMA sockets, the feed-through ensures a secure and low-loss connection between the antenna cable of your 4x4 MIMO 5G/LTE antenna and the antenna cable or directly to the antenna ports of the router or access point.

This SMA window feed-through is also available in a simpler version as well as for 2x2 MIMO in our range. Additionally, we offer this feed-through for use with WiFi antennas.

This 50 ohm coaxial adapter features the connector combination of SMA male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with SMA male to N male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This WiFi omnidirectional antenna has a performance gain of 5dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The dipole antenna is gray, suitable for indoor and outdoor use and has an RP-SMA connector. The antenna has an extra sealing ring. The signal opening angle is 360 ° horizontally and 40 ° vertically.

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the cable ideal for routing the antenna cable of a WiFi antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

This 50-ohm coaxial adapter features the connector combination of TNC male to N female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with TNC male to N female connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an SMA plug and an SMA socket. This makes the cable ideal for routing the antenna cable of a 3G, 4G, or 5G antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

This 50-ohm coaxial adapter features the connector combination of RP-TNC male to N female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.
<
Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with RPTNC male to N female connectors.
<
As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

The antenna cable of the type CNT400 is an extremely low attenuation and high quality coaxial antenna cable. It is supplied with the connector combination N male connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz.

The antenna cable of the type CNT400 is an extremely low attenuation and high quality coaxial antenna cable. It is supplied with the connector combination N female connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz.

This 50-ohm coaxial adapter features the connector combination of N male to N female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N female connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of N male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of N male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This coaxial adapter features the connector combination of N male to N female and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

JARFT Multiband 4G/5G omnidirectional antenna with up to 5dBi gain, SMA connector, and swivel joint. This rod antenna enhances the connection of your 4G or 5G router. The compact rod antenna screws directly onto your router, assuming it has external antenna connectors in SMA format.

The antenna covers both the traditional 4G frequency bands and the 5G frequency bands. It is suitable for all 4G and 5G frequency bands used in Europe. Typically, you will need two or four of these antennas for an LTE or 5G router.

This coaxial adapter features the connector combination of N male to N female and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

Weatherproof, robust, and compact multiband 5G / 4G antenna. This directional antenna offers a solid gain of up to 8dBi, is extremely broadband, covers all 5G and 4G frequency bands, and can therefore be used universally for all 5G or 4G data connections. Using this antenna can significantly enhance your LTE or 5G data connection.

The design of the antenna is compact. The directional characteristics and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aligned with the nearest mast of your 4G or 5G provider. Due to its weatherproof housing, this model can be easily used as an outdoor LTE or 5G antenna.

Solid mounting accessories for mast installation are included. A suitable antenna cable is optionally available in 2.5m, 5m, or 10m lengths. Using this antenna can significantly enhance your 4G or 5G data connection.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA male to RP-SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RP-SMA male to RP-SMA male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA male to SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RP-SMA male to SMA male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

Our weatherproof and robust 2x2 MIMO Multiband 5G / 4G (LTE) Antenna offers outstanding performance. With a gain of up to 14dBi and tremendous broadband capability, it covers all 5G / 4G frequency bands, making it a universal solution for all 5G or 4G data connections. The directional characteristics and strong signal focusing ensure stable 4G or 5G connections even over long distances, requiring alignment with the nearest transmitter mast from your provider. Thanks to its weatherproof housing, it is ideal for outdoor use as an 4G and 5G outdoor antenna. Solid mounting accessories for mast installation are included in the package. Optionally, a suitable TWIN antenna cable in 2.5, 5m or 10m can be ordered.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA female to RP-SMA female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RPSMA female to RPSMA female connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

The JARFT J5GMB-5-OMOA is a set consisting of two weather-resistant, omnidirectional multiband LTE (4G) / 5G antennas. The omnidirectional antenna has a gain of up to 5dBi, is very broadband (698 - 4000MHz), and therefore covers all LTE (4G) and 5G frequency bands. Thus, this antenna can be used for both LTE (4G) and 5G data connections. By using this antenna, you can enhance your data connection. The weatherproof housing allows the antenna to be used as an outdoor antenna. Due to its omnidirectional characteristic, the antenna does not need to be separately aligned and can be quickly and easily put into operation. The antenna is suitable for mast or direct wall mounting. Corresponding mounting accessories are included in the scope of delivery.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA female to RP-SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RPSMA female to RPSMA male connectors.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

Weatherproof and robust 2x2 MIMO multiband 5G / 4G panel antenna from PROSCAN. The directional antenna offers a substantial gain of up to 9.5dBi, is extremely broadband (600 - 6000 MHz), covers all 5G and 4G frequency bands, and can therefore be universally used for all 5G or 4G data connections. By using this antenna, you can significantly enhance your 4G or 5G data connection.

The design of the antenna is compact. The directional characteristic and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aimed at the nearest transmitter mast of your 4G or 5G provider. With its weatherproof housing according to IP65, this model can easily be used as an 4G or 5G outdoor antenna.

Solid mounting accessories with 2D regulation for mast and wall mounting are included in the package. The antenna comes with two 5m long antenna cables with SMA connectors. This way, the antenna can be directly connected to your 4G or 5G router. By using this antenna, you can significantly enhance your LTE or 5G data connection.

This coaxial adapter features the connector combination of RP-SMA female to RP-SMA male and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.

As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.