The Teltonika RUTX12 4G router was designed for mission-critical applications. The RUTX12 features two 4G modems (dual modem) with CAT6 standard, each providing speeds of up to 300 Mbps download and 50 Mbps upload (600 Mbps / 100 Mbps total). This ensures redundancy, which is particularly necessary for highly critical applications. In normal operation, load balancing distributes the load across the two data connections. If one of the connections fails, there is no interruption in service. This makes the RUTX12 indispensable for applications where connection loss is not an option. Additionally, the RUTX12 4G router includes a GPS module, five gigabit Ethernet ports, an integrated 802.11ac Wi-Fi access point, Bluetooth LE, and a USB interface. The RutOS software complements the device with a wide range of features (VPN, DDNS, etc.) and comprehensive security management. The RUTX12 can, of course, also be managed via the TELTONIKA RMS system.
The two integrated LTE modems of the TELTONIKA RUTX12 allow a constant LTE connection with transmission rates of up to 300 MBit down- and 50 MBit upload in LTE / 4G mode (according to CAT6 standard) and 42 MBit down - and 5.76 MBit upload (according to DC-HSPA + standard) in 3G operation. The integrated load balancer allows the simultaneous use of both connections. A total capacity of 600 MBit down and 100 MBit upload can be achieved. The SIM card slots can be equipped with a SIM card from any provider. For example, you can use two SIM cards from different providers and thus avoid connection failures due to insufficient network coverage of one provider.
With the integrated high-speed 802.11ac / Wave2 dual-band Wi-Fi access point, data rates of up to 867 Mbit are available. The RUTX12 also has an integrated 5-port Gigabit Ethernet switch.
The user-friendly web interface allows all users to comfortably configure the router. The RUTX12 can also be managed using the TELTONIKA RMS system.
The rugged aluminum housing, solid engineering and the firmware ensure consistent performance and durability of TELTONIKA RUTX12.
Technical Data:
Manufacturer / Model: | TELTONIKA / RUTX12 |
Modes: | Router, NAT Router, Bridge, PPPoE Client |
Processor: | Quad-core ARM Cortex A7, 717MHz |
Memory: | 256MB, DDR |
FLASH memory: | 256MB SPI Flash |
Integrated LTE Modems: | 2 |
Frequency: | LTE FDD B1, B3, B5, B7, B8, B20, B28, B32
LTE TDD: B38, B40, B41
3G: B1, B3, B5, B8 |
Bandwidth 4G: | Download: 300Mbps (CAT6) Upload: 50 Mbps |
Bandwidth 3G: | Download: 42Mbps Upload: 5.76Mbps |
4G/3G Antenna: | 4 x 3dBi Omni Antenna |
GPS: | GPS, GLONASS, BeiDou, Galileo and QZSS |
WLAN: | IEEE 802.11b (11 Mbps) IEEE 802.11g (54 Mbps) IEEE 802.11n (300 Mbps) IEEE 802.11ac (867 Mbps) |
Security: | WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
WiFi Antenna: | 2 x Dualband Omni Antenna (RP-SMA) |
Features: | NAT, DHCP Server/Client, Virtual Server, Port Forwarding, QOS, DMZ Host, Firewall mit IP-, MAC und Domain-Filter, OpenVPN, PPTP, L2TP, IPsec, VRRP, GRE Tunnel, SMS Control, DynDNS, RMS support, Input Triggers, Samba Share, Load Balancer |
Interfaces: | 1 x USB 2.0 (A) |
SIM Interface: | 2 x Standard Mini-SIM Slot |
WAN Interface: | 1 x 10/100/1000 Mbps WAN Port |
LAN Interface: | 4 x Gigabit RJ45 Ports (Auto MDI-X, Auto-Negotiation) |
Power Supply: | 9-50V |
Power consumption: | max. 22W |
Appliance: | Indoor |
E-mark certification: | Yes |
Dimensions: | 13.2 x 9.5 x 4.4 cm |
Casing: | Aluminium |
Weight: | 540g |
Operating temperature: | -40°C to 70°C |
Humidity: | 10% ~ 90% non condensing |
Scope of delivery:
1 x TELTONIKA RUTX12 4G Router |
4 x 3dBi 3G/4G Antenna (SMA) |
2 x Dualband WiFi Antenna (RP-SMA) |
1 x Bluetooth Antenna (RP-SMA) |
1 x GPS Antenne (SMA) |
1 x 1m CAT5e Ethernet cable |
1 x 12V/1.5A Power Supply with terminal block |
1 x Manual |